Passing State in Email Actions

You can pass state via a continue URL when sending email actions for password resets or verifying a user's email. This provides the user the ability to be returned to the app after the action is completed. In addition, you can specify whether to handle the email action link directly from a mobile application when it is installed instead of a web page.

This can be extremely useful in the following common scenarios:

  • A user, not currently logged in, may be trying to access content that requires the user to be signed in. However, the user might have forgotten their password and therefore trigger the reset password flow. At the end of the flow, the user expects to go back to the section of the app they were trying to access.

  • An application may only offer access to verified accounts. For example, a newsletter app may require the user to verify their email before subscribing. The user would go through the email verification flow and expect to be returned to the app to complete their subscription.

  • In general, when a user begins a password reset or email verification flow on an Apple app they expect to complete the flow within the app; the ability to pass state via continue URL makes this possible.

Having the ability to pass state via a continue URL is a powerful feature that Firebase Auth provides and which can significantly enhance the user experience.

Passing state/continue URL in email actions

In order to securely pass a continue URL, the domain for the URL will need to be allowlisted in the Firebase console. This is done in the Authentication section by adding this domain to the list of Authorized domains under the Sign-in method tab if it is not already there.

An ActionCodeSettings instance needs to be provided when sending a password reset email or a verification email. This interface takes the following parameters:

Parameter Type Description
url String

Sets the link (state/continue URL) which has different meanings in different contexts:

  • When the link is handled in the web action widgets, this is the deep link in the continueUrl query parameter.
  • When the link is handled in the app directly, this is the continueUrl query parameter in the deep link of the Dynamic Link.
iOSBundleId String Sets the bundle ID. This will try to open the link in an Apple app if it is installed. The app needs to be registered in the Console. If no Bundle ID is provided, the value of this field is set to the bundle ID of the App's main bundle.
androidPackageName String Sets the Android package name. This will try to open the link in an android app if it is installed.
androidInstallApp bool Specifies whether to install the Android app if the device supports it and the app is not already installed. If this field is provided without a packageName, an error is thrown explaining that the packageName must be provided in conjunction with this field.
androidMinimumVersion String The minimum version of the app that is supported in this flow. If minimumVersion is specified, and an older version of the app is installed, the user is taken to the Play Store to upgrade the app. The Android app needs to be registered in the Console.
handleCodeInApp bool Whether the email action link will be opened in a mobile app or a web link first. The default is false. When set to true, the action code link will be be sent as a Universal Link or Android App Link and will be opened by the app if installed. In the false case, the code will be sent to the web widget first and then on continue will redirect to the app if installed.
dynamicLinkDomain String Sets the dynamic link domain (or subdomain) to use for the current link if it is to be opened using Firebase Dynamic Links. As multiple dynamic link domains can be configured per project, this field provides the ability to explicitly choose one. If none is provided, the first domain is used by default.

The following example illustrates how to send an email verification link that will open in a mobile app first as a Firebase Dynamic Link using the custom dynamic link domain example.page.link (iOS app com.example.ios or Android app com.example.android where the app will install if not already installed and the minimum version is 12). The deep link will contain the continue URL payload https://www.example.com/?email=user@example.com.

final user = FirebaseAuth.instance.currentUser;

final actionCodeSettings = ActionCodeSettings(
  url: "http://www.example.com/verify?email=${user?.email}",
  iOSBundleId: "com.example.ios",
  androidPackageName: "com.example.android",
);

await user?.sendEmailVerification(actionCodeSettings);

Firebase Auth uses Firebase Dynamic Links when sending a link that is meant to be opened in a mobile application. In order to use this feature, Dynamic Links need to be configured in the Firebase Console.

  1. Enable Firebase Dynamic Links:

    1. In the Firebase console, open the Dynamic Links section.

    2. If you have not yet accepted the Dynamic Links terms and created a Dynamic Links domain, do so now.

    3. If you already created a Dynamic Links domain, take note of it. A Dynamic Links domain typically looks like the following example:

      example.page.link

    4. You will need this value when you configure your Apple or Android app to intercept the incoming link.

  2. Configuring Android applications:

    1. If you plan on handling these links from your Android application, the Android package name needs to be specified in the Firebase Console project settings. In addition, the SHA-1 and SHA-256 of the application certificate need to be provided.
    2. You will also need to configure the intent filter for the deep link in you AndroidManifest.xml file.
    3. For more on this, refer to Receiving Android Dynamic Links instructions.
  3. Configuring Apple applications:

    1. If you plan on handling these links from your application, the bundle ID needs to be specified in the Firebase Console project settings. In addition, the App Store ID and the Apple Developer Team ID also need to be specified.
    2. You will also need to configure the FDL universal link domain as an Associated Domain in your application capabilities.
    3. If you plan to distribute your application to iOS versions 8 and under, you will need to set your bundle ID as a custom scheme for incoming URLs.
    4. For more on this, refer to Receiving Apple platforms Dynamic Links instructions.

Handling email actions in a web application

You can specify whether you want to handle the action code link from a web application first and then redirect to another web page or mobile application after successful completion, provided the mobile application is available. This is done by setting handleCodeInApp to false in the ActionCodeSettings object. While a bundle ID or Android package name are not required, providing them will allow the user to redirect back to the specified app on email action code completion.

The web URL used here, is the one configured in the email action templates section. A default one is provisioned for all projects. Refer to customizing email handlers to learn more on how to customize the email action handler.

In this case, the link within the continueURL query parameter will be an FDL link whose payload is the URL specified in the ActionCodeSettings object. While you can intercept and handle the incoming link from your app without any additional dependency, we recommend using the FDL client library to parse the deep link for you.

When handling email actions such as email verification, the action code from the oobCode query parameter needs to be parsed from the deep link and then applied via applyActionCode for the change to take effect, i.e. email to be verified.

Handling email actions in a mobile application

You can specify whether you want to handle the action code link within your mobile application first, provided it is installed. With Android applications, you also have the ability to specify via the androidInstallApp that the app is to be installed if the device supports it and it is not already installed. If the link is clicked from a device that does not support the mobile application, it is opened from a web page instead. This is done by setting handleCodeInApp to true in the ActionCodeSettings object. The mobile application's Android package name or bundle ID will also need to be specified.The fallback web URL used here, when no mobile app is available, is the one configured in the email action templates section. A default one is provisioned for all projects. Refer to customizing email handlers to learn more on how to customize the email action handler.

In this case, the mobile app link sent to the user will be an FDL link whose payload is the action code URL, configured in the Console, with the query parameters oobCode, mode, apiKey and continueUrl. The latter will be the original URL specified in the ActionCodeSettings object. While you can intercept and handle the incoming link from your app without any additional dependency, we recommend using the FDL client library to parse the deep link for you. The action code can be applied directly from a mobile application similar to how it is handled from the web flow described in the customizing email handlers section.

When handling email actions such as email verification, the action code from the oobCode query parameter needs to be parsed from the deep link and then applied via applyActionCode for the change to take effect, i.e. email to be verified.